Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: - enduro catridge bearings - igus LL-glide bearings - double seal system (internal and external seals) - hex alloy end caps - o-rings - nuts - sleeve bushings - bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
The Speedplay grease gun allows you to lubricate your Speedplay pedals quickly and cleanly without disassembly. Speedplay pedal bearings require regular greasing to function properly. Speedplay uses needle bearings that allow Zeros to have the lowest stack height. Needle bearings require more frequent lubrication than cartridge bearings, so be sure to grease pedals every 2000 miles or 3 months, more frequently in dusty or wet conditions. Speedplay's professional-quality grease gun provides the hydraulic pressure necessary to flush dust and debris from the cartridge and needle bearings in Speedplay Pedals. Includes grease.
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
• Leather laminate with non-stretch inner layer • Steel hardware • Intended for use with double-strap toe clips (sold separately) • 140 grams per pair • 420mm length
• Steel • Intended for use with double-strap toe straps (sold separately) • Classic road toe clip profile • Includes mounting hardware • 36 grams per pair
Doubles represent the ultimate in toe strap comfort and performance. You won't believe how much more secure and comfortable they are than traditional singles until you've tried them yourself. Suddenly toe clips will make perfect sense, and you'll be riding with newfound confidence. - Leather with steel hardware - Intended for use with double-strap toe clips (sold separately) - 114 grams per pair - 420mm length
• Steel • Intended for use with double-strap toe straps (sold separately) • Includes mounting hardware • 50 grams per pair
• Nylon construction • Intended for use with double-strap toe straps (sold separately) • Includes mounting hardware • 36 grams per pair
Replacement pedal pins for Chromag pedals. Includes 40 pins.
Replacement pin set for Race Face Atlas and Aeffect pedals.
Bearing rebuild kit for Race Face Atlas pedals.
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Sometimes after a a few seasons of punishing riding through mud, sand, and dust, your pedals need a little love to get them spinning smoothly again. iSSi's Spindle Rebuild Kit includes everything you need to get your iSSi Triple pedals spinning just like new. Includes: • chromoly spindles • three sealed bearings • spindle nuts • seals • iSSi branded end caps
$50.00 - $52.00
Sometimes after a a few seasons of punishing riding through mud, sand, and dust, your pedals need a little love to get them spinning smoothly again. iSSi's Spindle Rebuild Kit includes everything you need to get your iSSi pedals spinning just like new. Includes: • chromoly spindles • sealed bearings • bushings • spindle nuts • seals • iSSi branded end caps
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward
Replacement axle kit for Chromag Contact pedals.
Replacement axle kit for Chromag Scarab pedals.
• Cleats to fit Ritchey Echelon and Look Keo clipless pedals • Includes a pair of cleats and hardware
• Includes a pair of cleats and mounting hardware • Compatible with Ritchey Pro-V4 and V5 mountain clipless pedals
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
The ultimate weight-saving upgrade. - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm
Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm
- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Page 1 of 2 Next page