Cables

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables

- Replacement link wire for cantilever brakes

Shifting cables for Road/Mountain bikes.

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

Hose kits for Hayes hydraulic disc brakes include stiff, durable hose and the necessary fittings.

- Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free - 2750mm length is compatible with tandems

Rejuvenate the performance of your brakes with this convenient and valuable kit that includes all parts needed for installation. Kit includes lubed housing, pre-stretched stainless steel cables, ferrules, cable frame protectors, and cable end caps for front and rear brakes. - This convenient and valuable kit is the key to restoring your brake's performance - Compatible with nearly all braking systems - Stainless steel cables are 2750mm and 1700mm long, for front and rear brakes - Compressionless housing comes pre-lubed is 3000mm long - Kit includes Comp brake ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched

Rejuvenate the performance of your mountain or town brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with most non-hydraulic mountain bike and city brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap

Rejuvenate the performance of your road brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with road brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap

Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Extra-long 3100mm length ensures fitment for any application - Compatible with Shimano and SRAM drivetrains - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap

Rejuvenate the performance of your drivetrain with this convenient and valuable kit that includes all parts needed for installation. - This convenient and valuable kit is the key to restoring your shifting performance - Compatible with Shimano and SRAM drivetrains - Stainless steel cables are each 2300mm long, for front and rear shifting - Compressionless housing comes pre-lubed is 3200mm long - Kit includes Comp shift ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched - Diameter: 4mm

- Compatible with Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Black Teflon cables are designed for ultra-low friction and corrosion-free shifts - Stainless steel and zinc galvanized steel cables are corrosion resistant

- All cables are pre-stretched - Low-friction, slick surface cables for smooth braking action - Can be used for road and mountain bikes - Stainless steel kit is rust-proof

Elegant style meets incredible weight savings with the XXX Cable and Housing set. It's time to take your road machine to the next level. Linked alloy housing is up to 40% lighter than traditional alternatives, while also being more flexible and incredibly smooth for class-leading performance. Product details - This lightweight, flexible, and elegant kit is perfect for the demanding rider - Compatible with road brake systems - Ultra-low-friction cables are 2300mm and 1700mm long, for front and rear road brakes - XXX housing features Pro lube and is lighter, more flexible, and stiffer than standard - Kit includes XXX brake ferrules, frame protectors, and cable end caps - For installation instructions, visit: trekbikes.com/manuals - Included stainless steel cables are rust-proof and come pre-stretched

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

- Wet or muddy condition cable sealing solution - 4/6mm

Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

Upgrade the performance of your brakes with this convenient kit that includes all parts needed for smooth and reliable performance. - This smooth and reliable kit is a great performance upgrade for your bike - Compatible with nearly all braking systems - Low-friction cables are 2300mm and 1700mm long, for front and rear brakes - Black compressionless housing comes pre-lubed is 3000mm long - Kit includes Elite brake ferrules, frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched - Housing diameter: 5mm

Upgrade the performance of your road brakes with this incredibly smooth and reliable cable. - Upgrade the performance of your brakes with this smooth and reliable cable; - Extra-long 2750mm length ensures fitment for any application - Compatible with road brake systems - Low-friction cable is rust-proof, comes pre-stretched, and includes cable end cap

Step up to premium performance of your road brakes with this upgraded kit that includes all parts needed for incredibly smooth performance. - This premium kit is for the performance rider looking for incredibly smooth braking; - Compatible with road brake systems; - Ultra-low-friction cables are 2300mm and 1700mm long, for front and rear road brakes - Black compressionless housing includes low-friction Pro lube and is 3000mm long - Kit includes low-friction Pro brake ferrules, frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched

Step up to premium performance of your road brakes with this incredibly smooth and long-lasting cable. The ultra-low-friction stainless steel cable comes pre-stretched and includes a cable tip. All Bontrager individual cables are extra long to fit all applications. Product details - This incredibly smooth and long-lasting cable is perfect for premium road brakes - Extra-long 2750mm length ensures fitment for any application - Compatible with road brake systems - Ultra-low-friction cable is rust-proof, comes pre-stretched, and includes cable end cap - Diameter: 1.6mm - Length: 2750mm

Step up to premium performance of your drivetrain with this upgraded kit that includes all parts needed for incredibly smooth performance. - This premium kit is for the performance rider looking for incredibly smooth shifting - Compatible with Shimano and SRAM drivetrains - Ultra-low-friction cables are both 2300mm long, for front and rear shifting - Black compressionless housing includes low-friction Pro lube and is 3200mm long - Kit includes low-friction Pro shift ferrules, frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched

Improve the performance of your shifting with fresh cable and housing. - Entry-level cable and housing set is great for servicing heritage bikes on a budget - Galvanized cable is corrosion resistant and comes pre-stretched - Includes one 1900mm cable and 1750mm of outer housing

Elegant style meets incredible weight savings with the XXX Cable and Housing set. It's time to take your road machine to the next level. Linked alloy housing is up to 40% lighter than traditional alternatives, while also being more flexible and incredibly smooth for class-leading performance. Product details - This lightweight, flexible, and elegant kit is perfect for the demanding rider - Compatible with Shimano and SRAM drivetrains - Ultra-low-friction cables are both 2300mm long, for front and rear shifting - Diameter: 4mm - XXX housing features Pro lube and is lighter, more flexible, and stiffer than standard - Kit includes XXX shift ferrules, Pro Inline Cable Tension Adjuster, frame protectors, and cable end caps - For installation instructions, visit: trekbikes.com/manuals - Included stainless steel cables are rust-proof and come pre-stretched