Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Wahoo ANT+ USB with Extension Cord
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
Bontrager Computer Batteries
$3.99 - $5.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Bontrager Duotrap S Cover - Carbon Road Frame
$3.99
Replacement chainstay cover for DuoTrap S Digital Sensor
Bontrager SpeedTrap Accessories
$3.99
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet
Bontrager DuoTrap S Chainstay Cover - Alloy Frames
$4.99
Replacement chainstay cover for DuoTrap S Digital Sensor
Bontrager Madone DuoTrap Chainstay Frame Cover
$4.99
Frame Cover fills chainstay pocket when sensor is removed.
K-Edge Replacement Wahoo Insert Kit
$5.00
Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
SRAM QuickView Adaptor
$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
Bontrager USB Fast Charge Cable
$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long
Bontrager 26mm Cadence Band Magnet
$7.99
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Bontrager 4mm Cadence Band Magnet
$7.99
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Bontrager Cadence & Speed Magnets
$7.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
Bontrager DuoTrap S Chainstay Cover - Madone 9 series
$9.99
Replacement chainstay cover for DuoTrap S Digital Sensor
BiKASE X Bracket
$11.99
The X Bracket allows you to use your BiKASE phone case on multiple bikes, ATV or stroller. For use with: - ElastoKASE - XL ElastoKASE - GoKASE 5 - GoKASE 6 - DriKASE w/ Bracket - DriKASE XL w/ Bracket - Mini iKASE w/ Bracket
Thule Pack n' Pedal Light Holder
$14.95
Get a clear view of the road ahead, thanks to Thule's Pack n' Pedal Light Holder. This clever accessory organizes your headlight, battery, and wires into a single attachment that's a snap to install and remove. Use it with Thule's Handlebar Mount (sold separately) to give yourself tons of lighting options for early-morning commutes and late-night trail rides.
Bontrager Blendr Kovee Pro 35 Stem Bases
$14.99 - $19.99
Blendr add-on to Kovee Pro 35 stems Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases. - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Kovee Pro 35mm stem - Add any accessory mount (sold separately) for an elegant, integrated look
Bontrager Blendr Blaze WaveCel Bike Helmet Mount
$15.99
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Bontrager Blendr Rally MIPS Bike Helmet Mount
$15.99
Easily integrated Designed specifically for specific Bontrager Rally MIPS mountain bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount light and camera accessories on top of your Bontrager Rally MIPS mountain bike helmet - Tested with accelerometer for intended breakaway point if involved in a crash
SRAM eTap BlipClamp
$16.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
Bontrager Interchange Analog Sensor
$17.99
Quickly and easily swap your Bontrager or Trek cycling computers and wireless sensors between bicycles without tools with these silicone mounting straps. Large and small sizes ensure proper fit on most forks. • Designed for Bontrager and Trek analog wireless computers • Interchange analog wireless sensor installs and removes in seconds without tools • Interchange sensor includes both L and S silicone mounting straps to fit most forks • Batteries can be found in computer accessories
Bontrager Speed Concept Mono Extension Mount
$17.99
Easily mount your computer in the fastest, most aero position possible with the Bontrager Speed Concept Mount. • Computer mount for the 2014 Speed Concept • Mounts to all mono extensions creating a faux bar for any standard handlebar-mount cycling computer
TerraTrike Accessory Mount - Boom
$19.95
This handy accessory mount can be installed on the boom of your TerraTrike. Perfect for accessories like headlights, iPod mounts, computers, etc. Compatible with any TerraTrike except the Rover model. - Designed specifically for mounting on the booms of trikes - Simple clamp design for easy installation - Provides room for cycle computers, lights, GoPro, Smartphone, etc.
Bontrager Blendr Circuit MIPS Bike Helmet Mount Front
$19.99
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Bontrager Blendr Circuit MIPS Bike Helmet Mount Rear
$19.99
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Bontrager Blendr Garmin High Mount
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Blendr Garmin Low Mount
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Blendr GoPro Mount
$19.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Node Adjustable Handlebar Mount
$19.99
Product details - Provides infinite angle adjustment allowing for your preferred computer placement - Compatible with 31.8mm handlebars
Bontrager Trip Mount for Blendr
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
CycleOps ANT+ Micro USB Adapter
$19.99
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Page 1 of 3 Next page